Menu
Confined Spaces Regulation Resources

Confined Spaces Regulation Resources

In 2015, OSHA issued a new standard for working in confined spaces. Confined spaces are those spaces which are difficult to enter and exit and can contain physical and atmospheric hazards that should be mitigated or eliminated prior to beginning work. Employers must evaluate all confined spaces such as an attic or crawl space in which their employees work to determine whether hazards exist or whether the work to be done in the space can create hazards.

The vast majority of confined spaces where TAP® Pest Control Insulation or ComfortTherm® Crawl Space Insulation is installed can be mitigated and safely avoided with proper preparation, awareness, caution, tools and equipment. Pest Control Insulation encourages you to conduct a thorough attic inspection prior to entering any contract with a homeowner to ensure the safety of your employees and the protection of the homeowner's property. When in doubt, review the OSHA Small Entity Compliance Guide.

Steps of an Effective Confined Space Entry Program

Employees shall not enter a confined space until the following requirements are met:

  • Employees that may encounter and/or enter a confined space are trained on entry procedures and made aware of possible hazards (i.e., falling through the ceiling, tripping on floor joists, colliding with a rafter) that may be encountered in the performance of their job.
  • Employees identify potential hazards prior to entry into a confined space.
  • Proper personal protective equipment is provided and worn prior to entry into a confined space.
  • Proper tools and equipment are provided and used prior to entry into a confined space.
  • Employees enter a confined space and continuously monitor for hazards.
  • Employees that define a permit required hazard which cannot be controlled and prevents safe entry must report this finding to their immediate supervisor and shall not enter the confined space without an attendant.
  • Employees implement the permit required confined space program in order to enter the confined space.

Dos and Dont's of Working in Confined Spaces

DOs DON'Ts
  • Be aware of the risks that may occur within a confined space
  • Make sure the person doing the work is capable and trained in both the work and the use of any emergency equipment
  • Always conduct an inspection of the attic/crawl space prior to entering into an agreement with a customer
  • Work in confined spaces unless it's essential to do so
  • Ignore the risks - just because a confined space is safe one day doesn't mean it will always be
  • Let others enter a confined space until you are sure it's safe to do so

For additional information on confined spaces, click the links below:

NPMA General Industry Confined Space Program (Sample)
OSHA - Confined Spaces
Frequently Asked Questions on the New Confined Spaces Regulation
CDC/NIOSH - Confined Spaces
Webinar: OSHA Confined Spaces in Construction Regulation: Compliance Tool Documents (Broadcase May 2016)
Webinar: New OSHA Regulation: Confined Spaces in Construction - Attics & Crawlspaces (Broadcase July 2015)